Knobs / Handles
Where will you attach the knob?
Bill is truly the bell of the ball and will go perfectly with any storage unit. To be used as a wall hook or door knob - that's up to you. Works perfectly for cabinets, drawers or kitchen doors. This knob is made from untreated ash wood and do not need any preparation before painting. For best results, paint it in two coats using your favourite colour. For a matte finish, we recommend gloss number 05.
Measures: 55Øx50 mm / 2.17"Øx2" Door thickness: Min 15mm /0.6", Max 20mm / 0.8" Material: Untreated ash wood
- Mark where on the cabinet door the knob is to be mounted, usually about 4-5 cm from each side of the corner.
- Drill a hole from the outside of the door, suitable for a 4 mm screw.
- Place the knob on the outside of the door and fasten the knob with a screwdriver from the inside.
1 - Screw the dowel screw all the way into the hook.
2 - Drill a hole in your wall, use the appropriate plug for your wall type (not included).
3 - Screw the hook into the hole (or hole with plug).
NOTE! Different walls need different plugs. The dowel screw is included but no plug.
Click on the picture from Instagram and shop the featured products. Tag your Insta-post with #Prettypegs and get published on our site!