Big Bill 55Ø Henna

ASSEMBLY OPTIONS

This product serves as both a cabinet knob and a wall hook. Depending on your choice of 'Door' or 'Wall' above, either a bolt or a wall screw is included.

Option 1: Installation on a cabinet door.

Option 2: Mounting on a wall.

Option 1: Knob

- Mark where on the cabinet door the knob is to be mounted, usually about 4-5 cm from each side of the corner.

- Drill a hole from the outside of the door, suitable for a 4 mm screw.

- Place the knob on the outside of the door and fasten the knob with a screwdriver from the inside.

Option 2: Hook

1 - Screw the dowel screw all the way into the hook.

2 - Drill a hole in your wall, use the appropriate plug for your wall type (not included).

3 - Screw the hook into the hole (or hole with plug).

NOTE! Different walls need different plugs. The dowel screw is included but no plug.