Furniture Legs
Knobs/Handles
DIY/Parts
Inspiration
Arvid Bold 120 Ash natural
Furniture leg in ash wood with steel toe
Color
Furniture category
Price
Total
195.00 SEK
/Leg
Product Details
With swooping curves, a steel toe and a slight carrot shaped figure. Our Arvid furniture leg will add a subtle sophistication to your furniture piece. This furniture leg of wood is universal and works great for storage furniture as well as bed legs or as sofa legs.
Specification
Height: 120mm / 4,72 inches Top width: 56mm / 2,22 inches Material: Ash wood and steel toe Max load per leg:* 150kg / 330 lbs
ASSEMBLY INSTRUCTIONS
2 different assembly options are listed below.
The correct fittings will be included depending on which furniture model is selected when adding the legs to cart.
Option 1:
Assembly with M8 (8mm) bolt, a standard fitting that is compatible with a wide range of furniture types.
1 - Attach the bolt into the leg by hand and apply the plastic washer over the bolt.
2 - Apply the plastic disc over the bolt and mount the leg to the furniture’s pre-drilled M8 thread.
Option 2:
Assembly with our Universal Fitting Plate, which is compatible with most furniture as long it has a flat wooden surface (or frame) which can take screws.
1 - Attach the plate with small screws in the corners of your furniture.
2 - Simply fasten the legs to the Universal fitting plate by hand.
NOTE
*Max load per leg is based on static, vertical weight and that the furniture is not subjected to abnormal stress or uneven load.
Important that the furniture rests on an even and stable surface.
Always attach your storage unit to a wall to avoid the risk of it falling over.
As with all furniture legs - remember to put felt pads on to protect your floor.
For sofa-beds - make sure the replaceable legs keep the exact same height as the original legs.
If the material in your furniture is porous, it could be necessary to use longer and thicker screws than the ones included.
