Furniture Legs
Knobs/Handles
Fronts
DIY/Parts
Outlet
Inspiration
Color
Price
Total
/Set
With organic shapes and deep ribbed lines that continue below the cabinet's base, it creates a soft, lively, and organic look that breathes new life into your Bestå furniture. Perfect for those who want rich detail that stands out a little extra. This model requires legs that are at least 12 cm high to prevent the door from touching the floor. Note - the images are not an exact reflection of the final product and some colour nuance and/or surface structure may differ slightly.
Each set contains - 2 front panels, 2 side panels, and 1 top panel. Plus Mounting pads.
Each set is "Made to order" - and the production is therefore longer, approximately 14 – 20 days.
For the side panels and the top panel, self-adhesive mounting pads are included for smooth and permanent installation. For the larger and heavier panels, it is also recommended to attach the side panels with screws (mounted from inside the furniture) for extra support and stability. Screws included for the heavier fronts. The fronts/doors are mounted with IKEA Besta hinges - which can be included to an extra cost. Screws included.
Important: The fronts are heavier than the original IKEA fronts. So it is crucial that the furniture must be anchored to the wall to prevent the furniture to tip over. Screws for attaching to the wall are not included
Start by cleaning the surfaces at the sides and the top of the furniture, using the cleaning cloth provided. Ensure the surface is dry before attaching the included Mounting pads. 6 pieces per side. And 6 pieces at the top.
Attach the SIDE panels and the TOP panel. It may help to lay the cabinet on its back to ensure the panels are attached straight.
Finish by attaching the fronts/doors using the IKEA Besta hinges, which can be included at an additional cost.
Feel free to match with our legs! The color tone and finish may vary slightly depending on the material.